ZHONGYUE MOULD, based in Huangyan, Taizhou—China's Mould Capital—is a professional Plastic Dust Bin Mould (Waste Bin / Trash Can Mold) manufacturer. We design and build custom injection molds for a full range of plastic waste bins: indoor pedal bins (5L–30L), classification/sorting bins, swing-top bins, and large outdoor wheeled dustbins (120L / 240L / 360L / 660L) per EN840 standard.
Our molds are engineered for high-volume production using PP and HDPE (high-density polyethylene), focusing on fast cycle times, flash-free parting lines, and long mold life under 24/7 operation.
| Type | Typical Sizes | Design Focus |
|---|---|---|
| Indoor Pedal Dust Bin Mold | 5L / 10L / 12L / 20L / 30L | Foot pedal linkage cavity, lid hinge, anti-slam damper seat, compact cooling |
| Open / Swing-top Bin Mold | 5L–50L | Vent/rib pattern, thin-wall filling, easy ejection |
| Classification / Sorting Bin Mold | 10L–120L (color-coded) | Interchangeable insert for label area, multi-color options |
| Outdoor Wheeled Dustbin Mold | 120L / 240L / 360L / 660L | Reinforced rim/turning lip, axle hole precision, large-format cooling, push-plate ejection |
| Decorative / Rattan-look Bin | 30L–80L | Textured imitation weave surface, deep cavity cooling |
Large bins retain heat. We design multi-loop, evenly distributed water lines in both core and cavity. BeCu (Beryllium Copper) inserts are inlaid at the top edge of the core and deep corners to accelerate heat extraction—reducing cycle time by 10–20%.
Pre-production MoldFlow analysis identifies optimal gate location (usually edge gate or hot tip) and predicts weld lines / air traps—critical for large flat surfaces and textured finishes.
Outdoor bins have large projected area. We use stripper plate (push board) ejection or balanced ejector pin arrays with return springs to prevent distortion during knockout.
For foot-operated bins, we offer molds for the pedal lever, lid hinge bracket, and inner bucket—either as separate tools or integrated into your production line.
Core/Cavity: P20 (pre-hard), 718H, 2738H (for medium-large bins), S136 (for high-gloss small bins).
Surface: High gloss polish (SPI A2/A3) or chemical texture (leather grain / rattan weave / orange peel).
Heat treatment & nitriding available to extend service life.
| Item | Specification |
|---|---|
| Mold Steel | P20 / 718H / 2738H / S136 / H13 |
| Cavity | Usually single cavity; multi-cavity for small lids/pedals |
| Runner | Cold runner (sub-gate/edge) or Hot Runner (YUDO / HASCO / INCOE) |
| Cooling | BeCu inserts + baffled water lines |
| Ejection | Ejector pins / Stripper plate / Air-assist for large shells |
| Mold Life | 500,000 – 1,000,000+ shots |
| Lead Time | 45–70 days (depending on size & complexity) |
| Applicable Material | PP, HDPE, ABS (for premium indoor bins) |
Taizhou Zhongyue Mould Co., Ltd. designs Plastic Dust Bin Moulds by addressing issues such as uneven barrel expansion, stress concentration at the rim, and deformation under heavy loading conditions.
We reinforce the upper rim and base structure while optimizing cavity balance, ensuring the bin maintains shape integrity even when exposed to long-term outdoor use and heavy filling.
Lid misalignment is often caused by tolerance deviation in hinge positioning. We control this through precision machining and strict assembly alignment during mold manufacturing.
Yes. We can develop molds for pedal-operated dust bins by integrating linkage structure precision, ensuring smooth motion and reliable long-term mechanical performance.
We strengthen handle zones with optimized rib transitions and stress diffusion design to reduce fatigue failure caused by repeated lifting and heavy loads.
Yes. By optimizing structural ribs and wall thickness distribution, we can reduce material consumption while maintaining strength and rigidity.
We design proper venting systems and adjust gate positions to eliminate trapped air, ensuring smooth filling and preventing burn marks or short shots.
We combine mold flow analysis, high-precision CNC machining, and durable steel selection to maintain consistent performance in long-term, high-frequency production environments.
Backed by 50+ team numbers and 20+ CNC machines, ZHONGYUE provides full DFM reports, T1 trial with sample video, and spare parts support worldwide.
Contact ZHONGYUE MOULD today for a customized quotation and mold design proposal for your Plastic Dust Bin / Trash Can Mould project.
Request a technical consultation and competitive quote for indoor pedal bins, sorting bins, or large wheeled dustbins.
Send Inquiry →
